Who concrete sleeper walls suit in Armadale
A concrete sleeper wall suits Armadale homeowners who want a slim, tidy retaining wall that takes up little yard space and needs little upkeep. Steel posts are set in concrete footings and the sleepers slide in between, so it is also a popular way to replace a rotting treated pine wall.
Signs your timber sleeper wall is near its end
Tired timber walls tend to show it: sleepers that crumble when pushed, posts leaning forward, gaps where soil spills through, or a fence above starting to tilt. Once rot sets in, patching single sleepers rarely holds for long, and replacing the whole run with concrete is usually the cleaner fix.
How posts, footings and fence loads fit together
The strength of a sleeper wall sits in its posts. Post spacing, post depth and footing size depend on the wall height and the soil behind it. A fence on top adds wind load to those same posts, so mention any planned fence before the wall design is settled.
Concrete or timber sleepers: the decision
Timber costs less at the start and is easy to cut on site, but it rots, shrinks and can attract termites over time. Concrete sleepers cost more upfront, yet they do not rot, hold their shape and come in finishes such as plain grey, wood grain or stone look. For a wall you want to forget about, concrete usually wins.
Other wall types worth comparing
If a sleeper wall is not quite right, poured concrete walls suit taller or heavily loaded sites, and steel walls give a thin, modern edge. Limestone and block walls need more width at the base. Comparing two or three types against your height and available space helps narrow the choice.
Drainage behind a sleeper wall
Sleeper walls are not watertight, and they should not be. Gravel backfill and a slotted drain pipe behind the sleepers let rain escape, so the wall is not holding back wet, heavy soil. Some seepage through the joints after rain is expected; constant flow or staining points to a drainage problem.
Your next step: measure what you have
Pace out the wall length, check the highest point of retained soil, and note whether an old timber wall has to come out first. Add whether a fence will sit on top or beside it. Those few details are enough to compare sleeper options properly.
Concrete Sleeper Retaining Walls Services We Offer
✓Timber Wall Replacement
Old treated pine sleepers and posts are removed and replaced with steel posts and concrete sleepers along the same line.
✓New Concrete Sleeper Walls
A fresh post and panel wall for levelling a yard, creating a garden bed or holding back a slope.
✓Sleeper Walls with a Fence on Top
Posts and footings sized to carry the extra wind load of a fence mounted above the sleepers.
How it works
- 1
Check the site and soil
The wall line, height and soil type are looked at, along with any old wall, fence or boundary that affects the work.
- 2
Plan posts and footings
Post size, spacing and footing depth are set to suit the height, soil and any fence load on top.
- 3
Clear the old wall and set posts
Any rotting timber is removed, holes are dug and steel posts are concreted in line and left to cure.
- 4
Fit sleepers, drain and backfill
Concrete sleepers slide between the posts, a drain pipe and gravel go in behind, then soil is backfilled and levelled.